Temperature Control Baths - HAAKE Tubing & Bath Liquid Technical Specifications


HOME ABOUT US PRODUCTS CONTACT US SEARCH

HAAKE Tubing & Bath Liquid Technical Specifications
Description	Order-No.
Insulated metal tubings made from stainless steel with M16x1 unions on both ends. To be used from -50^oC to +300^oC.
50cm long	333-0292
100cm long	333-0293
150cm long	333-0294
Coupling to connect 2 tubings to each other	001-2560
Tubing Clamps
For tubings, 8mm, metal	000-2025
For tubings 12 mm, metal (Thermo Baths)	000-2716
For tubings 12mm, plastic	000-2656
For tubings 8mm, plastic	000-2711
Tubing Fittings
Closing plate, stainless steel	001-0798
Coupling nut M 16 x 1, stainless steel, for attaching hose couplings 001-1209, 001-1210 and 001-3718 (Thermo Baths)	160-0025
Coupling nut M16 x 1, stainless steel	001-0797
Coupling R3/8” – M16 x 1	333-0314
Fitting, stainless steel, for tubings 12mm (phoenix line)	001-1210
Fitting, stainless steel, for tubings 8mm (phoenix line)	001-1209
Spiral spring to prevent kinks for tubings with 12mm diameter	333-0147
T- piece for tubings with 12 mm i.Æ (Thermo Baths)	806-0435
T- piece for tubings with 8 mm i.Æ (Thermo Baths)	806-0410
T-piece for metal tubings M 16 x 1 union	001-1766
Tubing pinch cock (Thermo Baths)	806-0419
Universal hose nozzle for tubing 3 – 6mm	001-3718
Insulated metal tubings made from stainless steel with M16x1 unions on both ends. To be used from - 90 to +105 °C.
100cm long	333-0578
150cm long	333-0579
Coupling to connect 2 tubings to each other	001-2560
PVC tubings to be used only with water
8mm internal diameter:per meter	082-0745
12mm internal diameter:per meter	082-0304
Viton tubings for temperature range of -60^oC to +200^oC
8mm internal diameter:per meter	082-1214
12mm internal diameter:per meter	082-1215
Silicone tubings for a temperature range of -30^oC to +220^oC (not to be used with any silicone oil, for example thermo HAAKE SIL)
8mm internal diameter:per meter	082-0663
12mm internal diameter:per meter	082-0664
Perbunan tubings for a temperature range of -40^oC to +100^oC
8mm internal diameter:per meter	082-0172
12mm internal diameter:per meter	082-0173
Foam rubber insulation for PVC, Viton, Silicone and Perbunan tubings
For tubings with 8mm internal diameter:per meter	806-0373
For tubings with12mm internal diameter:per meter	806-0374

Bath Liquids

The carefully selected and proven heat transfer liquids offer the following advantages given their correct usage:
• No health hazard and a minimum of unpleasant odors.
• A high resistance against aging while retaining a low viscosity with a low corrosive tendency.

Note: A good ventilation is recommended when working at temperatures > 200 deg C

1. Viscosity
For optimum temperature accuracy it is very important that the heat transfer liquid is of low viscosity.

2. Fire Point
Flammable thermal liquids can ignite when a specified temperature is surpassed. The usage of bath liquids is limited to a temperature level 25deg C below the fire point as defined by the EN61010.

3. Selection
Silicone oils (Sil):
Carry a low risk of inflammation, do not give off unpleasant odors and have a long service life.

Synthetic thermal liquids (Synth):
Are mainly produced on a hydrocarbon basis and exhibit a low viscosity within the reccomended working temperature range.

4. Application Range
Working temperature range
This is the range within the circulator can be optimally operated over a longer period of time. The maximum viscosity is approx. 5m Pas.

Operating temperature
The circulator may only be operated within this range over a longer period of time under certain conditions. Viscosity may rise to a maximum of 30mPas. The pump capacity no longer matches the specifications made in the brochure.

Heating up Range
Long Term temperature controlling in this range is not permissible as the pump motor's excess temperature protection may switch the pump off.

Application

Sil 100

Sil 180

Sil 300

Synth 60

Synth 200

Synth 260

Fire point

>100°C

>225°C

>325°C

70°C

>235°C

>275°C

Viscosity at 20°C [mPas]

200

100

140

Density at 20°C [kg/dm3]

0.89

.93

1.08

0.76

0.86

1.03

Spec. heat capacity [kJ/kg x K]

1.67

1.51

1.56

2.10

1.96

2.00

Temperature Range

Heating-Up Range

Operating Temperature Range

Working Temperature Range

Reacts with

Silicone

Copper

Light - metals
Bronze

Order-No. 10l - l Container

999-0202

999-0204

999-0206

999-0226

999-0214

Order-No. 5l - l Container

999-0201

999-0203

999-0205

999-0225

999-0213

EC-Safety Data sheets will be delivered together with each container of liquid.

Back • Return To Top